The Complete Attic Fix Phoenix Homeowners Trust: Remove. Seal. Insulate.

Stop patching problems. Our proven 3-step attic insulation removal and retrofit system eliminates contaminated insulation, seals every hidden air leak, and installs fresh R-49 insulation, all for one transparent price.

Why "Adding More Insulation" Won't Fix Your Hot, Expensive Home

Your attic is the biggest culprit behind those rooms that won’t cool down and energy bills that keep climbing, but here’s what most insulation companies won’t tell you: simply blowing new insulation on top of old, contaminated material doesn’t solve the problem.

If your home was built more than 15 years ago, your attic likely has:

  • Compressed, settled, or rodent contaminated insulation that’s lost most of its R-value
  • Dozens of unsealed gaps and penetrations around electrical boxes, plumbing pipes, can lights, and HVAC boots, letting your expensive conditioned air escape directly into the attic
  • Insulation that’s actually trapping heat rather than blocking it

These hidden issues mean your AC runs constantly, your upstairs feels like a sauna, and you’re paying for air that’s literally floating into your attic.

Foam Pro’s Remove, Seal, Insulate Package addresses all three problems in the right order. Because the sequence matters just as much as the materials.

Our Proven 3-Step Attic Insulation Removal Process. Done Right, in the Right Order

Most contractors skip straight to blowing in new insulation. That’s like painting over rust. At Foam Pro Insulation, we follow the building-science approach that actually delivers lasting comfort and energy savings:

  • 1) Complete Insulation Removal — $1.20/sqft


    We don't bury problems. Using commercial-grade vacuum equipment, we extract every bit of old, underperforming, or contaminated insulation from your attic. This exposes the air leaks that have been silently stealing your comfort for years.

    What we remove:
    • Settled or compressed fiberglass that's lost its loft
    • Rodent-damaged or moisture-contaminated materials
    • Old cellulose that's collapsed and clumped
    • Any debris, dust, or foreign materials

    Note: Pricing assumes full attic access. Final estimate confirmed during your free in-person inspection.

  • 2) Manual Air Sealing — $250 per 2,000 sqft


    This is the step most companies skip—and it's the most important. With the attic floor exposed, our technicians methodically seal every penetration between your living space and attic using professional-grade foam sealants:

    Top plates (where walls meet the attic floor)
    Electrical and plumbing penetrations
    Recessed light housings and junction boxes
    Bathroom exhaust fan terminations
    HVAC duct boots and register connections

    Air sealing alone can reduce your energy loss by 20-30%. Combined with proper insulation, you'll finally feel the difference. Air sealing is only performed after removal—because you can't seal what you can't see.

  • 3) R-49 Blown-In Fiberglass Installation — Included in Package


    Once your attic is clean and sealed, we install fresh Knauf Jet Stream Ultra blown-in fiberglass to achieve R-49 (approximately 11 inches of coverage)—meeting or exceeding Energy Star recommendations for Phoenix's climate zone.

    Why we use Knauf:
    • Consistent coverage with no gaps or voids
    • Non-combustible and non-corrosive
    • Formaldehyde-free for healthier indoor air
    • Won't settle or compress over time like cellulose

What's Included in Your Remove, Seal, Insulate Package

When you book your free attic inspection with Foam Pro Insulation, here's exactly what you can expect:

✓ Complete attic assessment — We measure current insulation depth and estimate existing R-value.

✓ Thermal imaging — We identify hot spots and hidden air leaks invisible to the naked eye.

✓ Contamination check — We look for signs of rodents, moisture, or mold.

✓ Duct leakage evaluation — We check for disconnected or damaged ductwork.

✓ Photo documentation — You'll see exactly what we see.

✓ Written estimate — Transparent pricing with no pressure.

During Your Installation:

Site preparation — We protect your home's interior with drop cloths and shoe covers.
Thorough removal — Commercial vacuum extraction of all old materials.
Meticulous air sealing — Every penetration addressed with professional sealants.
Precision installation — Blown-in insulation installed to exact depth specifications.
Post-installation verification — Depth measurements and photos confirm proper coverage.
Complete cleanup — We leave your home cleaner than we found it.



After We're Done:

Before/after photo documentation for your records.
R-value summary confirming insulation depth achieved.
Maintenance tips to protect your investment.
APS/SRP rebate guidance — We'll help you understand available utility incentives.

Ready to Finally Fix Your Attic the Right Way?

Stop living with hot rooms, high bills, and the nagging feeling that something isn’t right with your home’s comfort. Foam Pro’s Remove, Seal, Insulate Package gives you the complete attic transformation Phoenix homes need—at a price you can see upfront.

Your free inspection takes about 30 minutes and includes thermal imaging, contamination assessment, and a written estimate with no obligation.

Get Your Free Quote

Transparent Pricing • Comprehensive Inspections • Available When You Need Us